2020. 3. 3. 15:12ㆍ카테고리 없음
Contents.Copy Meteohub Image on a SD CardMeteohub needs a SD card of a minimum capacity of 4 GB (8 GB or 16 GB recommended). You find the nedded Meteohub image for download. When you have downloaded the compressed image file, decompress it with winrar (on Windows) or unrar (on Linux). Resulting file is about 2 GB in size named like 'mhrpi-vxyz.img'. Next you have to put this file onto a SD card. As this is not a regular file, but a multi-partition disk image, you need a special tool to make a low-level copy to the SD card.WindowsOn Windows you need to download and run a special tool to do the required low-level writing to the SD card. The tool of choice is 'ImageWriter' from SuSE (you find additional information about this tool ).
Nslu2 Setup
Please download to your Windows PC. It does not need to be installed it is just a small executable to run. Please insert the SD card into your PC wait a few seconds and then start downloaded 'ImageWriter.exe'. Wait until a dialog like this pops up. Press 'copy' and the image data will be written to SD card.
Linksys Nslu2 Setup Wizard Download
When operation has finished without error, you are done with this step. Please pull the USB stick from your Windows PC.LinuxOn Linux you use the 'dd' command. Please insert the SD card into your Linux box and check via 'dmesg' what device the stick has been mapped to.